When using Gorilla Glue, clamp objects for 1-2 hours. The key is ensuring a tight-fitting glue line by applying an even pressure distribution.Ī. Professional clamps are ideal, but if those aren’t handy, heavyweight from bricks, books, or even tape on some smaller repairs will work. There are many ways to clamp your pieces, but remember that the stronger the pressure, the better the bond will be. To ensure the strongest bond, clamping pressure is needed. Once the glue is dry, it is best removed mechanically: try sanding, chiseling, scraping, or picking at it. Make sure you use the solvent with care in a well-ventilated area. If you need to remove any squeeze-out, we recommend wiping with a dry cloth or using a standard paint thinner. Be careful of uncured ‘squeeze out’ or wet glue, particularly on finished furniture. As a general guide, use one ounce per square foot. A little bit goes a long way, so apply half as much as you think you need. For dense hardwoods, lightly dampen both surfaces before gluing.Ī. Then apply glue to the dry surface and clamp. Therefore, you must apply a small amount of moisture to one surface. Gorilla Glue reacts with moisture to cure – this is what causes the chemical reaction in polyurethane adhesives. Why do I need to add moisture before gluing?Ī. For smooth, shiny surfaces, try sanding first to roughen the surface and give the glue something to bite. Make sure surfaces are clean and tight-fitting. Do I need to prepare the surface first?Ī. Some things are just difficult to glue, such as certain plastics, but we are confident that once you’ve tried Gorilla Glue, you will be more than satisfied with the results. It is free of solvents and fillers, making it strong and versatile. If used correctly, it will bond just about anything and for just about forever. Is Gorilla Glue really for the Toughest Jobs on Planet Earth?Ī.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |